1

Contact us

ADD:5th Floor, Building 7, No.1

Industrial Zone, Xili Nangang, Nanshan

District, Shenzhen
TEL:0755-82871176
FAX:0755-29641518
E-mail:
info@szlamplCic.com
WEB:www.szlamplic.com

 
 
 

Phone:0755-27528082
Mobile:13712133380

 
 

Sweep and follow us

 
 

粤ICP备12010857号-3  LAMPLIC TECHNOLOGY Copyright@2007-2010 All Rights Reserved. QQ:871173356    

Follow us

UV application

FLOOR COATING

Page view
Shenzhen LAMPLIC Technology Co., Ltd. has comprehensively solved the problem of slow solidification of the floor. With a large number of R&D teams, elaborate design of customized products, coating and curing has been achieved in various fields. Ultraviolet UV LED curing technology is used to make the floor curing faster, more convenient, more environmentally friendly and efficient.
 
 
Slow curing means that the curing reaction of epoxy resin materials becomes slower at extremely low temperature (10 degree C). It is absolutely forbidden to construct at 5 degree C. This phenomenon has a great relationship with the viscosity. The lower the temperature, the higher the viscosity will be, and it will be more difficult to construct. The curing time is too long, which will cause the coating to be contaminated with dirt, sand and other stolen goods, and even slow down the construction period. Another point is that adding solvents on the construction site will also cause the solidification to be too slow, because the volatilization of solvents will take away part of the heat and cool the film.
 
 
So far, LAMPLIC Technology Co., Ltd. has spent a lot of manpower and material resources to develop a new solidified horizon car, which is more efficient for the solidification of the floor and saves a lot of time, manpower and material resources for the solidification of the floor.
Previous article:
Next article: