1

Contact us

ADD:5th Floor, Building 7, No.1

Industrial Zone, Xili Nangang, Nanshan

District, Shenzhen
TEL:0755-82871176
FAX:0755-29641518
E-mail:
info@szlamplCic.com
WEB:www.szlamplic.com

 
 
 

Phone:0755-27528082
Mobile:13712133380

 
 

Sweep and follow us

 
 

粤ICP备12010857号-3  LAMPLIC TECHNOLOGY Copyright@2007-2010 All Rights Reserved. QQ:871173356    

Follow us

UV application

Paper-plastic composite

Page view

Composite films formed by two or more layers must be as inseparable as a single film.This involves not only the adhesive between two thin films, but also the ink film.Adhesives are synthetic products most adhesives are two-component polyurethane (PU) adhesives.The adhesives on the substrate surface are primarily a physical process and only a small fraction are chemical processes in which the components of the adhesives are drilled together with the components of the plastic film and further solidified.

If a thin film is already printed in the bonding process then the adhesive and ink to meet more requirements.The most basic requirements are in the compound before the inner layer to have a good adhesion fastness and complete drying.The more it tastes, the less solvent is allowed to remain in the printed film.But in the ink of the linker often residual solvent or alcohol.For this reason, the properties of adhesives must be able to bind to free radicals (-oh groups).Otherwise the adhesive and curing agent will bond themselves together and lose their feline properties.For example, in the compound process, the film has been printed with PVB ink, and the ink is left with isohydric acid salt, the chemical group of the salt "NCO group" will react with alcohol and water free radical - OH.

In drilling agents, solvent-based adhesives and UV adhesives such as solventless drilling agents are different.Solvent-based drilling agents require a drying path to allow lotions to evaporate.When using a UV adhesive, UV light passes through the film to the adhesive to hold the adhesive together.

At present, composite film preparation technology is also used in the preparation of some inorganic nonmetallic films, which has achieved the improvement of photoelectric comprehensive performance.

Previous article:
Next article: