1

Contact us

ADD:5th Floor, Building 7, No.1

Industrial Zone, Xili Nangang, Nanshan

District, Shenzhen
TEL:0755-82871176
FAX:0755-29641518
E-mail:
info@szlamplCic.com
WEB:www.szlamplic.com

 
 
 

Phone:0755-27528082
Mobile:13712133380

 
 

Sweep and follow us

 
 

粤ICP备12010857号-3  LAMPLIC TECHNOLOGY Copyright@2007-2010 All Rights Reserved. QQ:871173356    Powered by www.300.cn

Follow us

>
>
>
ACPSA anisotropic conductive voltage sensitive adhesive

UV material

ACPSA anisotropic conductive voltage sensitive adhesive

Page view
Pressure-sensitive adhesives for short. It is a kind of pressure sensitive adhesives. It is mainly used to prepare pressure sensitive adhesive tape. The adhesive force of pressure-sensitive adhesive (the peeling force between the adhesive tape and the bonded surface after pressure bonding) must be greater than the adhesive force (the so-called tactile force shown when the finger touches the adhesive tape lightly). According to its main components, it can be divided into rubber type and resin type. In addition to the main ingredients, other auxiliary ingredients, such as tackifier, plasticizer, filler, viscosity modifier, vulcanizing agent, antioxidant, solvent and so on, should be added.
 
 
LAMPLIC CO.,LTD innovatively developed anisotropic conductive UV pressure sensitive adhesives. Through screen printing process, with the rapid characteristics of UV curing, it can quickly realize elastic anisotropic conductive pressure sensitive adhesives on specific surfaces.
 
 
Anisotropic conductive pressure sensitive adhesives are suitable for rapid repairing, non-thermal curing position of special-shaped components, and have low cycle time.
 
 
Typical applications include printing and medical electronics, RFID, touch screens and electronic circuits. Other applications include conductive connection of strip cables, polymer thick film circuit, electrical connection of surface mounting devices, intelligent label and connector installation.
 
 
Pressure-sensitive adhesives for short. It is a kind of pressure sensitive adhesives. It is mainly used to prepare pressure sensitive adhesive tape. The adhesive force of pressure-sensitive adhesive (the peeling force between the adhesive tape and the bonded surface after pressure bonding) must be greater than the adhesive force (the so-called tactile force shown when the finger touches the adhesive tape lightly). According to its main components, it can be divided into rubber type and resin type. In addition to the main ingredients, other auxiliary ingredients, such as tackifier, plasticizer, filler, viscosity modifier, vulcanizing agent, antioxidant, solvent and so on, should be added.
 

ACPSA anisotropic conductive voltage sensitive adhesive