粤ICP备12010857号-3 LAMPLIC TECHNOLOGY Copyright@2007-2010 All Rights Reserved. QQ：871173356
UV microwave infinity lamp
Lamplic UV LED oven UV curing oven, oven using LED light-emitting mode, can choose 365 nm, 385 nm, 395 nm, 405 nm wavelength of different powers of LED corresponding to curing different UV glue, UV ink, UV varnish, UV paint, etc.
No infrared radiation, cold light source, suitable for curing all kinds of heat sensitive materials.
Start the machine without preheating, and it will be ready to use, instantly reaching the maximum light intensity.
It saves electricity and is easy to operate.
No mercury, no ozone, safe and environmental protection
The Lamplic high-efficiency UV electroless UV lamp is a UV light source that ionizes rarities in the high-energy microwave field and emits light. Its lamp has neither filament nor electrode, but a small amount of luminescent gas and luminescent substance is filled in the vacuum quartz tube.
1: the lamp tube has no electrode, the end of the lamp tube will not become black, the service life is over 10,000 hours.
2: quick start and restart. No need to use the shutter and its associated mechanical device.
3: low infrared radiation: when the linear velocity is 5 meters /min, the curing temperature is 45 5.
4: ultraviolet light output is strong, the intensity is more than 5 times the traditional pole lamp, more than 60% of the power saving compared with traditional lamps.
5: simple structure, easy to use and maintain
6: several different spectral outputs can be provided. The user can optimize the uv wavelength according to the chemical reaction sensitivity to obtain the desired final product performance. Blue spectrum rick efficient UV electrodeless UV lamp is a kind of magnetic energy lamp, is the integrated application of optics, power electronics, plasma, magnetic materials in areas such as the latest achievements of science and technology research and development of high-tech products, is a kind of representative lighting technology high photosynthetic efficiency, long life, high color rendering for the future development direction of new light source.
High frequency infinity lamp: 2.65MHz, or 2650 KHz, usually in bubble shape.
Low frequency infinity lamps: 250KHz and 140KHz, generally annular.
Under the condition that color rendering index Ra=80:
The light effect of high frequency infinity lamp is generally 80Lm/W.
The light efficiency of low-frequency infinity lamp is generally 85Lm/W.
The higher the power, the higher the light efficiency
Power range of high frequency infinity lamp: 10w-200w
Low frequency infinity lamp power range: 20W-400W
The shape of the lamp
High - frequency non - pole lamp: to a variety of bubble - based.
Low frequency infinity lamp: mainly ring, rectangle, also has the shape of ball and bubble.
No matter high frequency or low frequency, as with other electronic products, as long as the circuit design is reasonable, it can pass the electromagnetic interference detection.
The promise lamp is the application power electronics, the plasma science, the magnetic material science and so on domain newest science and technology achievement development develops the high and new technology product, among them the magnetic core material is the promise lamp in the most key component, the performance of the magnetic core material directly decided the promise lamp quality.
Lanpolik high efficiency UV electrodeless UV lamp consists of three parts: high frequency generator, coupler and bulb. It is coupled to the lamp by the electromagnetic field of the high-frequency generator in an inductive manner, which ionizes the gas avalanche inside the bulb and forms a plasma. The plasma excited atoms emit ultraviolet radiation when they return to the ground state. The phosphors on the inside of the bulb are excited by ultraviolet light to produce visible light.
1. No filament or electrode in the bulb, and the service life of the product is more than 60,000 hours.
2. High luminous efficiency, high frequency infinity lamp 80Lm/W, low frequency infinity lamp 85Lm/W.
3. The color rendering index is over 80, using high-quality tri-color phosphors without color distortion.
4, wide voltage, voltage in 185v-255v can work normally.
5. The high-frequency operating frequency is 2.65mhz and the low-frequency operating frequency is 230Hz, without stroboscopic effect
6, light decline is small, after 20000 hours light pass maintenance rate can reach 80%
7. Instantaneous start-up and restart time are all less than 0.5 seconds.
8. Low start-up temperature, large temperature range, -25c, can start and work normally.
9. The power factor can be up to 0.95 or above. 10. Safe and reliable, green and environment-friendly, truly maintenance-free and change-free.
The advantages and disadvantages
1, high frequency non-pole lamp small volume, more changes in the shape of the bulb, can be matched with more lamps and lanterns, old lamps and lanterns slightly modified can also be used, under the same power light efficiency is higher, the rapid movement of particles in the bulb formed a shielding cover, to eliminate electromagnetic radiation. However, due to the limitation of bulb size, the power cannot be very large, and usually the power can only be 200W.
2, low-frequency non-pole lamp due to the coupler outside, the lamp volume is large, so the heat dissipation effect is also very good, so the power can be made larger. However, due to the large size of the lamp can be very few, and cause some lumen loss. In addition, external coupler also makes it more difficult to solve EMI.
There are still some problems to be improved:
1. "non-pole lamp" life problem: the theoretical life of the non-pole lamp is 60,000 hours. However, in fact, if cheaper components are used, including the life of "electrolytic capacitor", it will lead to only 16,000 hours or so in the high-temperature environment of the non-pole lamp. In particular, some of the price is too low lamp life will certainly be greatly reduced.
2. "infinite lamp" light effect: the theoretical light effect of the infinite lamp is only 80Lm/W, while the actual light effect of the product is only 65Lm/W. However, more energy of the light emitted by the lamp is concentrated in the visible light near the wavelength of 550nm, so the total light flux of the lamp will be brighter than that of the sodium lamp.
3, "non-pole lamp" volume problem: due to the special structure, the non-pole lamp volume is very difficult to do very small, which limits the non-pole lamp into the home decoration market.
4, the "cost of electrodeless lamp" problem: more use regular brand metal halide lamp between a set of price is in commonly 200-400, less known and inferior brand will be cheaper, and a set of ensuring quality, including life and light failure, electrodeless lamp market prices, even if there is a big down, but still is controlled in 600-700, and a line of big brand is may a set of nearly one thousand yuan, which makes even electrodeless lamp performance and better energy-saving sex, but a lot of factory building new or replacement because of the budget of the investment for alternative energy saving lamps and lanterns will have to give up electrodeless lamp. Therefore, in order to achieve the popularity of metal halide lamps or compact fluorescent lamps (commonly known as energy-saving lamps), manufacturers need to carry out certain cost control on the premise of ensuring quality so as to make more users accept, instead of only a few large enterprises or enterprises with better economic benefits will buy the lamps.
5. Power factor and harmonic problem of "infinity lamp" : manufacturers of "infinity lamp" all publicize that their power factor is as high as 0.98 or higher. As we all know, power factor is a concept related to inductive or capacitive load. It is easier to achieve this target by using full bridge rectifier, which is one of the reasons why many infinity lamps can replace metal halide or sodium lamps that have much more power than their own. However, in the actual market, there will be non-polar lamps whose power factor does not reach this value. It is suggested to test them before purchase.
6. "promise lamp" high-power and heat dissipation problem: promise lamp high-power problem, there has been no good breakthrough. We know, high photosynthetic efficiency of the sodium lamp, when the 170 w heat, make the quartz tube temperature as high as 400 ℃ or higher, but the quartz tube and can work above 700 ℃ for a long time, so the high temperature is not very big influence on their life. And the quantity of heat of the lamp without pole is working although have 100 many degrees only, but the component of its electron ballast belongs to the component that is more sensitive to quantity of heat, must want to separate bulb temperature and ballast effectively so, can affect its service life otherwise. And from a common sense point of view, the greater the power, the greater the heat, in order to ensure the service life, many manufacturers will be the non-pole lamp power within 185W, the general general in 165W, and the traditional sodium lamp power up to 10000W, so the non-pole lamp to achieve high power, there is a lot of work to do. But itself as an energy saving product, the power is not too high shortcomings can not be too demanding, but if the power can be made large, its application place will be greatly increased, such as high pole lamp, remote spotlights, 18 meters above the ultra-high plant is difficult to see the figure of the light.
The standardized question of the seven, "electrodeless lamp" : because electrodeless lamp has not been unified standards of the state, each manufacturer production enterprise standard or references to other commonly used lamps and lanterns of standards, but according to relevant regulation, enterprise standard need to pass through quality and technology supervision departments for the record to use, this makes the production of energy-saving lamps manufacturer has certain legal risks (enterprise standard is not for the record, etc.). And because the standards are different, each manufacturer electrodeless lamp ballasts products cannot be free replacement, so lead to the customer can't choose their after-sales service unit, can only choose the supplier, and most of the products were done by the dealer, its cooperation with manufacturers of state will directly affect the unit using the after-sale protection, this also is many users when choosing to purchase energy-saving lamps often needs to one of the reasons all the way to find a factory directly.
8, "the lamp" on the energy-saving misleading: although the lamp can indeed save energy, but can not do some manufacturers or sellers of publicity of unlimited energy alternative. According to the actual test, on the premise of ensuring brightness is not affected, even if choose the light rate higher mirror lamp shade replaces the traditional metal halide lamp frosted cover, also can do most of the metal halide lamp 1:2 alternative, namely in 125 w energy-saving lamps to replace 250 w metal halide lamp, it is better to replace 250 w, 165 w can ensure the brightness or luminance is better, but if use 165 w and 175 w energy-saving lamps to replace 400 w metal halide lamp you need to be encrypted in the number of lamps and lanterns. Some infinity lamp salesmen claim that 125W or even 85W can replace 400W metal halide lamps, which is a bit of an exaggeration. It only takes a test of the lamp to draw a practical conclusion.
9. The future of "promise light" and "LED light" : "promise light" and "LED light" are competing for the position of the fourth-generation light source. Compared with the non-pole lamp, LED light source also has a longer theoretical life and takes energy saving as the selling point. Although the cost price of LED is much higher than that of wl, some policy guidance and subsidy funds are more in favor of LED, and its publicity advantage is much stronger than wl. As a result, many people only know about LED but do not know about wl, let alone use it. Especially in some government tenders or funded projects, energy-saving lighting products are often equated with LED, which makes the infinity lamp more only in some enterprises to raise funds to buy a certain cost advantage. But an industry to become bigger and stronger, even if again good products and technology, in the economic situation without the government's policy support is also very difficult, this has led to the level it is difficult to see electrodeless lamp in carriers of large enterprises, even in the like with the Chinese academy of sciences, anhui ustc, etc for many years is domestic electrodeless lamp technology research and development of pioneer and institutions, electrodeless lamp companies or in small batch production, production orders, or in the form of processing in order to reduce the risk, it is difficult to form large-scale electrodeless lamp industry cluster. We hope that in the near future, no matter "promise lamp" or "LED lamp", "HID lamp" will replace "the third generation" and become the ideal light source for "high efficiency and long life".
Long life, high efficiency and energy saving
Since there is no filament or electrode inside the bulb, the service life of the light source only depends on the electronic circuit of the lamp and the manufacturing technology of the bulb. The general service life can reach 60,000 ~ 100,000 hours. High efficiency and energy saving. Maintenance-free, long life, life is more than 60000 hours. Radiation of the same luminous flux, power consumption is only 1/6 of the incandescent lamp, light efficiency can reach 65Lm/W. Without filament and electrode, the life of a cask lamp mainly depends on the life of the electrolytic capacitor and the natural attenuation of fluorescent powder. The life of the lamp can reach more than 60,000 hours, which is 60 times that of an incandescent lamp and 20 times that of a halogen lamp. Compared with the ordinary incandescent light bulb, the energy saving rate of 80% or more.
High color rendering
Using fluorescent tri-base color powder, the electro-optical conversion efficiency is high, the color rendering index is greater than 80, the light is soft, the light chromaticity is close to the sun, low glare, showing the natural color of the object.
High power factor
The circuit adopts specially optimized design, the power factor is greater than 95%. Among them, the power factor of high frequency infinity lamp can reach more than 99%. No stroboscopic light source: as the working frequency is as high as 2.65mhz, it is regarded as "no stroboscopic effect at all", which will not cause eye fatigue and protect eye health. Green environmental protection raw materials are used in the solid mercury, even if broken will not cause pollution to the environment, more than 99% of the recyclable rate, is the real environmental protection green light source.
Low maintenance cost
General incandescent lamp, fluorescent lamp, energy-saving lamp, and other gas discharge lamp have filament or electrode, and the sputtering effect of filament or electrode is exactly the inevitable component that limits lamp service life. The non-pole lamp has no electrode and emits light by combining the principle of electromagnetic induction with the principle of fluorescence discharge, so it has no components that limit its service life. Therefore, the theoretical service life of the light source is up to 60,000 ~ 100,000 hours, which can greatly reduce the maintenance cost of replacing the light source.
1. High efficiency and energy saving, the light efficiency >75Lm/W is 80% more energy saving than the ordinary incandescent lamp, 60% more energy saving than the metal halide lamp, and 20% more energy saving than the ordinary energy-saving lamp; 85W non-polar lamp replaces 150W metal halide lamp (high pressure sodium lamp). Under the same visual condition, the comprehensive energy saving is more than 60%; Installation of the same number of lamps, the use of non-pole lamps can reduce the output circuit current by more than 4 times, the capacity of the transformer is also greatly reduced.
2, shockproof, long life because the bulb no filament no electrode, using high frequency electromagnetic coupling mode of work, not afraid of vibration, its life is 60 times the incandescent lamp, is 12 times the metal halide lamp. General service life is more than 60,000 hours, can reduce frequent maintenance, greatly reduce the number of replacement of light sources and costs, energy saving and money.
3, quick start can be started at low temperature, can immediately start and restart, start time less than 0.5 seconds, without frequent switch restrictions, there will be no ordinary with electrode discharge caused by obvious light recession phenomenon.
4, high power factor design power factor >0.98, the set of infinite lamp consumption power is very close to the input power. Low harmonic content, no interference to household appliances, no pollution to the power grid. No radiation to the lighting space, does not affect people's health, electromagnetic compatibility indicators in line with national standards.
5, environmental protection, no strobe, good color rendering the tri-color rare earth phosphor used in the headless lamp as a layer, the color rendering index is greater than 80, the illuminated object presents a natural color, color reduction is good, is a real environmental protection green light source. Its working frequency is as high as 2.65mhz, and the general lamp is 50HZ, so it is regarded as "no stroboscopic effect", which will not cause eye fatigue if used for a long time.
6, color temperature is optional, installation adaptability is high from 2700K~6500K, according to customer needs, and can be made into color bulbs, used for garden decoration and lighting. Compact glass shell design, so that the lamp design has more freedom, can be installed in any direction, without restrictions.
1, long-term ignition point, the replacement of difficult places through many years of long-term testing and inspection, the lamp can reach 100,000 hours of ignition life. For places with high maintenance difficulties (such as high-ceiling plants, high-precision equipment workshops, tunnels, Bridges, roads, energy and chemical industries, etc.) and European and American countries with very high maintenance costs, their value and quality are highlighted.
2. For glare, color temperature, color rendering and other indicators in places with high requirements on light and color index, infinity lamp has completely taken the lead in all kinds of lighting products through the improvement of lamp structure, reflector design, light source technology and other aspects. In the high precision workshop workshop, food processing and sales areas, textile printing and dyeing processing areas, open-air tennis courts and other sports venues, has been highly praised by customers.
3, high requirements for energy saving places for energy saving requirements, the non-pole lamp with its high initial light efficiency (light efficiency of more than 90lm/W), long-term point of light decline small characteristics, really ensure customers 5 years of excellent user experience.
4. The manufacturers of special lighting non-pole lamps have been committed to exploring more widely used areas and lighting places, with successful cases and significant user improvements in plant lighting (red and blue spectral lighting), livestock storage lighting, supporting low-voltage solar system, dc emergency power supply system lighting and other fields.
Scope of application
Based on electrodeless lamp long service life, remarkable energy-saving effect, high safety, green environmental protection and other characteristics, so suitable for factory workshop, school classrooms, a library, greenhouse vegetable plants tent, hall, conference room, shopping malls, high ceiling factory, stadium, tunnel, traffic complex area (street lights, logo lights, lamp) bridge, railway stations, subway station under the dangerous region or lighting krathong, designs city-lighting flood lighting, landscaping, lighting, etc., especially suitable for the high risk and difficulty in the lamp and an important place for maintenance is expensive.
The poleless lamp is based on the principle of electromagnetic induction, through the magnetic field for energy transfer, unlike ordinary fluorescent lamps, the use of electrodes, through the electric field to convert the external electrical energy required for the internal work of the lamp. Because the coupler is the key component to transfer energy, so the quality of the magnetic tube used in the coupler is very important to the quality of the lamp, so the choice of the lamp must know what kind of magnetic core is used in the lamp.
Because the non-pole lamp has no electrode, the lamp tube part does not exist with the vulnerable component, the entire system life mainly depends on the electronic ballast, therefore this kind of lamp life is very long, may achieve above 60,000 hours. Especially suitable for difficult and expensive places and places with high safety requirements. Such as tunnels, complex traffic areas, subway stations, factories with high ceilings, lighting in dangerous areas, halls, sports fields, etc. During installation, the power must be cut off to ensure safety. Make sure the wiring port is correct before power on.
In case of abnormal operation (self-extinguishing, flickering), the power should be immediately turned off and removed for inspection by professionals.
The bulb base (coupler base) must be firmly connected to the fixture of the lamp to ensure good heat dissipation.
The shielding wire between the bulb and the high-frequency generator shall not be lengthened or shortened.
The bulb and high frequency generator shall be grounded separately during installation.
No matter what kind of lamps are used, the lamp housing must be grounded.
The time of ignition of the light source shall not exceed 15 minutes when the light source is not connected with the lamp (let the lamp itself play the role of heat dissipation).
Do not touch the bulb directly when the bulb is on or just off to avoid scald.
Couplers and high frequency generators cannot be changed at will.
Neither the poleless lamp nor the high frequency generator can be installed on the luminaire without heat sink.
Please check the heat dissipation device of the light if the infinite light is not on or off occasionally.
If the generator is installed in a closed electrical box, the upper cover of the generator can be removed.
Microwave infinity lamp UV
Microwave infinity lamp UV